Skibike/Snowbike Sledgehammer Fusion 2.0

The Skibike Fusion 2.0 is the combination of everything we have learned. It combines the previous models Fusion, Trixy and 5.3 in one ski bike.

It is similar to the 2022 ‘Trixy’ ski bike, but is slightly stretched. And of course it has a saddle that allows you to adapt your position to the riding situation while riding, both sitting and standing, and always maintain contact with the ski bike. The saddle is a bit longer than the trixy variant and can therefore be somewhat comfortable

The skis have become significantly stiffer and the ski holder has been completely revised. But we couldn’t really change much, because the previous model was already a brilliant ski bike. This model also has large, forged cross footrests, which provide a lot of safety.

This time we chose the DNM Burner RCP 2 shock absorber. This serves well and is very robust. If you want to tune your chassis, you can do this yourself with almost all commercially available high-end mountain bike shock absorbers and forks. It was important to us to be able to offer well-functioning fun sports equipment in terms of basic equipment at the lowest possible price.

With the Fusion 2.0 you can ski down difficult and steep slopes without any problems with short turns – the controlled swerve from the rear – and you are very agile when the forest gets tight.
It is specially designed for carving on hard slopes and at high speeds. The extra guidance of the long saddle gives you more control when braking and during steep descents on hard slopes.

The MX-style footpegs fold back when you lean heavily and the new, much wider ski adapters let you apply more pressure to the edge.
This ski bike gives more than ever the safe feeling of being ‘in the frame’. It is suitable for a height of 165 to 195 cm.

Why the Fusion 2.0?:

• By adjusting this geometry, lowering the position of the footrests, The Skibike can also be used for ” Stand-up riding “.
• Stand-up riding provides more comfort but also a more direct ability to carve, steer and maintain grip on all snow/piste conditions.
• The highly appreciated click system for the skis has been made simpler.
• Due to an adjusted geometry, the handlebars are further away from you, which ensures more weight distribution over the ski bike, but also simplifies making 360’s with the handlebars.
• The 5.3 model also contains a heavier springwhich provides even closer precision adjustment and can absorb even heavier impacts during rough rides.
• The rear damper can now be moved to 9 positions for the ideal adjustment.
• New folding footrests have been added.

Both an alternative and a new challenge for winter sports

Because this model is made so comfortable, it is also the perfect model for winter sports enthusiasts who no longer have good mobility, have an injury, suffer from joints and knees during winter sports, the elderly, novice winter sports enthusiasts and so on. Two pedals can be mounted on the side, so you don’t need foot skis. If you want this, you can order these foot skis separately.

We recommend using foot skis for quiet and conservative winter sports. For the adventurer we recommend not to use foot skies, test the model through jumps, tricks and sharp carving turns.

Technical specification of the Fusion 2.0:

• 6060 T6 alloy frame available in one size only
• Motocross foot rests forged of 7005 Aluminum
• Short Sledgehammer stem with 50 mm
• All bearings are water-tight roller bearings
• Twin Tip Flat Rocker wood core Ski with 160mm width and 990mm length
• Rear shock DNM Burner RCP 2 adj. rebound and compression
• 135-182mm travel at the rear (depending on mounting points)
• 160mm air suspension fork with adjustable rebound
• Rise handle bar 100 mm width 780 mm
• Foot rest height 233mm
• Mx-style seat bench at 774mm height
• Total height 1060 – 1100 (depending on spacer used under stem)
• Total length 2017mm (1200 without skis)